Combined Transformer(Pad Mounted Transformer), is an electrical equipment developed on the basis of transformers, the characteristic is that the Load Breaker Switch, Fuse and Transformer are integrated in the tank. This product is widely used in power distribution systems in the United States, and also many applications in other regions.
Combined Transformer(Pad Mounted Transformer), is an electrical equipment developed on the basis of transformers, the characteristic is that the Load Breaker Switch, Fuse and Transformer are integrated in the tank. This product is widely used in power distribution systems in the United States, and also many applications in other regions.
Technical Specifications
ZGS
Rated Power (KVA)
Could be customized, typical value are as follows: 150, 225, 300, 500, 750, 1000, 1250, 1500,
1750, 2000, 2250, 2500, 2750, 3000, 3750, 5000
Frequency
60Hz or 50Hz
Insulation oil
Mineral Oil or Natural Ester
Temp Rise
55° C, 65° C, could be customized
Voltages
Available in or Y configuration
Up to 34.5kV,
Voltage ratio could be customized as per customer requirement
HV Bushing Config
Loop feed or radial feed
Applications
Power distribution
Renewable Energy
Industrial applications
Data Center
Customer Value
Certificates
UL certificate covers the mainstream voltage levels and rated power.
Safe design
Dead-front designs, more safer as live parts are not exposed, making them ideal for residential and commercial areas.
Flexible Configurations
Pad mounted transformers voltage ratio can be customized as per customer requirement, applicable to different power distribution systems.
Integrated Protection Systems
To ensure safe operation, pad mounted transformers are equipped with built-in protection like double fuse protection, pressure relief valves.
Tamper-proof enclosures and high Corrosion-resistant performance
Tamper-proof enclosures with lockable doors to prevent unauthorized access. Corrosion-resistant coatings extend the service life of the transformer, ensuring reliable service in outdoor environment.
Voltage fluctuation quietly damages industrial equipment. Learn how a three-phase voltage stabilizer works and why independent phase regulation matters for generator-backed power.
Long-term solar performance depends on the electrical system, not just the panels. A practical guide to smart switchgear, protection, and combiner box selection for PV.
In oil and gas, poor power quality can trigger safety shutdowns and damage instrumentation. A practical guide to power quality monitoring for operations teams.
HVAC uses up to 40% of a commercial building's energy. The electrical control system determines efficiency, reliability, and BMS integration. Here's what to know.
In commercial buildings, emergency lighting is a legal requirement. A practical guide to system design, compliance, and integrating backup power with life safety.
Choosing the wrong generator control components causes failure when it matters most. A practical guide to ATS, circuit breakers, and dual supply design.
As e-commerce pushes warehouse automation to new heights, electrical control systems are under more pressure than ever. Here's how to specify them correctly.